USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Site Notification

Site Notification

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Mechanical Properties of TC-128B Steel during Multiple Stages of Tank Car Fabrication

Document Series
Technical Reports
Author
Federal Railroad Administration
Report Number
DOT/FRA/ORD-22/04
Office
RPD-32
Subject Hazardous Materials
Keywords
Steel, TC-128B, tank cars, fabrication, post-weld heat treatment, PWHT, transportation safety, fabrication, tensile testing, mechanical properties, material characterization

This report describes a testing program examining the effects of different stages of tank car fabrication on the mechanical properties of TC-128B steel. This work focused on two procedures: cold-working associated with rolling a flat plate of steel into the cylindrical tank shell and post-weld heat treatment (PWHT). The Volpe National Transportation Systems Center developed a plan and executed a contract for tensile tests on TC-128B steel samples. TC-128B was provided in four different conditions by two different tank car builders: an “as-received” flat plate, a flat plate put through PWHT, a cold-worked shell, and a cold-worked shell put through PWHT. By characterizing the material properties at different stages of fabrication, the effect of each manufacturing process on the material’s behavior could be isolated. Cold-working did not have a consistent effect on strength or ductility, while PWHT increased ductility but reduced ultimate tensile strength.


Last updated: Thursday, February 3, 2022